High-pressure mist humidifiers are used in many industries, but how many of them really understand them in depth? Choose a high-pressure micro-mist humidifier that suits you. After a simple understanding, this is not possible. You may know how to use it and the pros and cons of its operation, but this is the most basic. You must know it in depth. Maintenance of high-pressure mist humidifiers, several points to pay attention to when maintaining and using the main unit, etc. These are still waiting for us to re-understand. >
Let’s get to know the high-pressure micro-mist humidifier from the beginning
The high-pressure micro-mist humidifier unit consists of a pump station unit, an ultra-fine atomizing nozzle, a water filtration system, a control unit, a high-pressure shunt valve unit, and an ultra-fine mist humidifier. Strong filtration system, high-pressure pipeline composed of high-pressure micro mist humidifier uses a plunger pump to pressurize the water purified by the filter to the left and right, and transports the pressurized water to the ultra-fine nozzle through the high-pressure thick-walled pipeline for atomization, and Rotating at high speed, ultra-fine mist particles are sprayed into the entire space. The ultra-fine mist particles absorb heat in the air and evaporate from liquid to gaseous state, increasing the humidity of the space and reducing the temperature of the air. This is the humidification and cooling process of the micro mist system.
The high-pressure micro mist humidifier has the characteristics of energy saving, high humidification efficiency and low maintenance. It is currently the most economical humidification equipment in the humidification industry. The unit is optimized in design and the engineering installation configuration is reasonable to provide users with safe and reliable products. The sprayed water mist exchanges heat and moisture with the air to achieve the purpose of humidifying and cooling the air. The water mist absorbs heat in the air and changes from liquid to gas, increasing the humidity of the space. The whole process is an isenthalpy process. It is widely used in the textile industry, papermaking industry, computer room, electronics industry, mobile phone battery industry, spraying industry, plastics industry, gunpowder industry, printing industry, laboratory, tobacco industry, HVAC industry, fresh storage, food industry, and planting industry. , breeding industry, artificial landscape, artificial fog, printing factory, printing and dyeing factory, air conditioning factory, supermarket, etc.
When using a high-pressure mist humidifier, check whether the water lines, circuits and pipeline connections are correct before starting it. Check the correctness of the installation process and the correctness of the connecting lines from beginning to end in the order of the original work. Open the water supply valve and let the water drain for a few minutes to fully eliminate rust and precipitated impurities in the pipeline. Please make sure to turn off the power during maintenance. When the equipment is running normally, the water and power switches do not need to be turned off. Do not turn the water inlet switch too high to avoid excessive water pressure and spraying out of the water tank. After long-term shutdown, before re-using, the water source faucet should be removed, the water source valve should be opened, the rust and impurities in the pipe should be drained, and then reconnected before use. Replace the high-end lubricating oil for the high-pressure pump regularly (monthly). When the lubricating oil in the pump turns white, please replace it immediately.
Maintenance methods for high-pressure micro mist humidifiers
All pipelines in the entire humidification system should use professional high-pressure pipelines to prevent pipeline breakage and blockage due to rust. Micron super filtration must be installed when connecting the nozzle to the tap water pipe. to prevent solid particles in the water from clogging the nozzle. If the machine is used in cold areas, antifreeze measures must be taken. When the host is installed outdoors, add rainproof measures. After use, cut off the water source and drain the remaining water in the pump to prevent freezing of the column. The plug pump adds lubricating oil to the crankcase before the first operation of the high-pressure pump, and adds it to the middle position of the two horizontal lines on the oil level gauge. Do not overfill the high-pressure pump. The lubricating oil needs to be changed during the first hour of operation, and then every hour thereafter. Regularly check whether the oil temperature is at ℃, and pay attention to whether there are any abnormal sounds from the plunger pump. Pay attention to check whether the plunger pump oil changes color or becomes thicker, which affects the lubrication effect. When users choose a humidifier with a humidification capacity, they must consider the size of the humidification space, the expected humidity value, and the ventilation conditions of the humidification space. Do not equate the effective humidification volume in the product promotional materials with the humidification space itself. It is recommended to communicate with our professionals when determining the humidification amount.
News